Construction of a Standard Baking Oven (Mini-Oven) With Dual Power Source (Electric/Gas) is a complete project materials with references and abstract
CLICK HERE TO DOWNLOAD THE COMPLETE MATERIAL (CHAPTER 1 -5)
PASS 2024 UTME WITHOUT STRESS:- 👉 DOWNLOAD and PRACTICE with 2023 UTME CBT APP 📱👈
CLICK to DOWNLOAD NOW.:- 👉 PASS Your POST UTME by Downloading Your School's Post UTME Past Questions and Answers 📱👈
ABSTRACT
This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology.
Students are expected to learn and apply concepts, principles about energy specially the conversions of electrical energy to thermal energy, conduction and conventional heat transfer etc.
Also the determination of the properties of various ferrous and non-ferrous materials, electrical installation occults. The application of engineering measurement and quality control.
Also to build an intellectual ability in interpretation of working drawing in designing and development before and after working process. Students will get an opportunity to appreciate safety, and the use of both machine and hand tools in the course of working.
TABLE OF CONTENT
CHAPTER ONE
BACK GROUND
Objective of project
Importance
Limitations
CHAPTER TWO
LITERATURE REVIEW
History of ovens
Types of oven
2.2.1 Conventional/standard oven
2.2.2 Fan forced oven
2.2.3 Microwave oven
2.2.4 Multi-functional oven
2.2.5 Solar oven
2.3.0 Mode of oven operation
2.3.1 Electrical section
2.3.2 Gas section
CHAPTER THREE
SAMPLE ACTIVITIES
Sequence of activities during operation
Summary of events
Graphic illustration
F.G.1.1 Obilique projection
F.G.1.2 Ontograhic projection
F.G.1.3 Sectional view
F.G.1.4 Circuit Diagram
CHAPTER FOUR
MATERIAL METROLOGY
Materials and Reasons for use
Behaviour of mild steel when heated
Graphic of heating and cooling curves for mild steel
Working tools use for project
Bill of Quantities
CHAPTER FIVE
Performance and evaluation of oven
Care and maintenance
Standards and symbols
Reading
Combustion of methane gas
Conclusion and recommendation
Bibliography
CHAPTER ONE
BACKGROUND
OBJECTIVES
This project is undertaken to
- Compare the various ways used in the production of an electric and gas oven.
- Disclose the different types of process in the manufacturing of an electric oven and also a gas oven in the past in comparison to the morden days method.
- Exploit the local facilities available in the construction of the oven as against imported ovens.
- To exhibit the usefulness of a dual-purpose oven in the economy and technology growth of the nation.
- To know the convenience in the use of alternate power source for operation of ovens.
- Discover the basic principle involved in the design and maintenance of a dual purpose oven.
IMPORTANCE OF OVENS
In actual analytical enunciation an oven is an enclosed chamber in which things are heated or cooked with various sources of power.
Its importance borders around its function, which are as follows;
- It is used to meet the everyday basic need of cooking, (baking, toasting, gritting, toasting) of food materials for human consumption.
- Ovens are used for heat treatment of substance in laboratories and industries.
- Also as a means of preservation by heat application to perishable materials (organic and inorganic) in general.
- Sterilization of instruments and equipment for industrial use is done by heat application using oven.
- Expelling of moisture content to a required measure in some substance is also done using oven.
- Early manufactured ovens where used as a source of room heaters during cold weathers in cold climates.
Other importance boarding around its energy source is that the use an alternative source of energy when either fossil fuel or electricity is not available. This can be relatively save cost when necessitated.
LIMITATIONS
Disadvantages in the use of ovens:
(i) Cleaning and repair is a difficult and time- consuming endeavor.
- Expect for mass production singular construction is relatively expensive to produce.
- If precautions are not well carried out, it can result in fire hazard, which is dangerous to life and properties.
- Because ovens provides heat for one or more areas, the temperature may vary in different areas of the oven.
- Oils and moisture collected on metal surface can end up trying to rust the metal coating if not clean regularly.
- It is expensive to operate in high volume operations.
- Speed seem to be the key factor and time taken to get to required constant temperature can be wastage of time.
- Access to internal component n case of adjustment and maintenance is tasking as it requires an entire disassembling.
- In case of mechanical faults resulting from shut down, an entire disassembling and requires is required.
- Due to its function by heating, there is always a premature wear or mechanical failure of some of the internal component.
CLICK HERE TO DOWNLOAD THE COMPLETE MATERIAL (CHAPTER 1 -5)
>GUARANTTEE|:| Score 280 Above in 2024 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE:.: GURRANTTEE Score 280 Above in 2022 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE 📱👈WISH TO STUDY & LIVE in UK?:- STUDY, WORK AND LIVE IN the UK Application Form NOW OUT. Call 08030447894
