Complete final year project materials on Construction of PVS Conduit Wiring System of Two Bedroom Bungalow from chapter one to five. Download in PDF and MSword.
CLICK HERE TO DOWNLOAD THE COMPLETE MATERIAL (CHAPTER 1 -5)
PASS 2024 UTME WITHOUT STRESS:- 👉 DOWNLOAD and PRACTICE with 2023 UTME CBT APP 📱👈
CLICK to DOWNLOAD NOW.:- 👉 PASS Your POST UTME by Downloading Your School's Post UTME Past Questions and Answers 📱👈
DEPARTMENT OF ELECTRICAL ELECTRONIC ENGINEERING
ABSTRACT
This project present a practical demonstration of how to carryout the wiring of a two bedroom bungalow, using PVC conduit system. In recent times surface wiring is gradually giving way to conduit wiring where much of the cable are concealed.
PVC pipes are used because of it cost friendliness, compared to metal conduit. In carryout this construction a careful attention is given to the IEF regulations. Calculations are made for current consumption, space factor, diversity factors and other necessary consideration that guarantees safely of material and personnel.
PREFACE
The main purpose of this project is to present at a glance the working of P.V.C. wiring system arrangement of two bedroom bungalow.
We touched on all the factors affecting the installation of conduit wiring system and materials including accessories and hope that this choice is reasonable and that the inclusion of many illustration and such descriptive matter will make the project beneficial and acceptable to Engineering students and those in Electrical and Electronic Department in particular.
The visual aids are of great help in passing information to readers, clear diagram are used which will no doubt be of tremendous help in understanding this project.
Chapter one covers the general introduction, types of conduit user and advantages, choice of wiring a material used and IEE regulation.
Chapter two emphasize on review of component units, table of space factor, rating factors and circuit lighting and CCU.
Chapter three resulted on construction procedure, wiring system and circuit wiring. Building structure with design of Electrical symbol, layout diagram of P.V.C conduit wiring system, systematic wiring diagram.
Hence, chapter four talks about operation and testing, grounding of earth electrode, calculations under diversity, durability, safety and application.
Finally, chapter five concentrated on Bill of Quantity Recommendation and Conclusion.
It is behaved that the manner of approach of topic and presentation adopted will make an early step to easy reference on all pages of this project work.
TABLE OF CONTENT
Title Page
Litter of Transmittal
Release Page
Approval Page
Dedication
Acknowledgement
Abstract
Preface
CHAPTER ONE
1.0 INTRODUCTION
1.1 Types of Conduit System
1.2 Uses and Advantages
1.3 Choice of Conduit
1.4 Materials Used
1.5 I.E.E Regulation
CHAPTER TWO
2.0 REVIEW OF COMPOUND UNITS
2.1 Accessories
2.2 Circuit Diagram of Lighting, Ring and Consumer Control Unit.
2.3 Table of Space Factors
2.4 Load Schedule
2.5 Rating Factor
CHAPTER THREE
3.0 Construction Procedure
3.1 Conduit Installation
3.2 Conduit Capacity
3.3 Wiring System
3.4 Conduit Wiring
3.5 Building Plan with Design of Electrical Wiring Systems
3.6 Layout Diagram of P.V.C Conduit
CHAPTER FOUR
4.0 Operation and Testing
4.1 Verification of Polarity Test
4.2 Insulation Test
4.3 Earthling Test
4.4 Types of Earth Electrode
4.5. Circuit Breaker
4.6 Fuses
4.7 Calculation Under Diversity
4.8 Durability
4.9 Safety
4.9.1 Applications
CHAPTER FIVE
5.0 Conclusion
5.1 Recommendation
5.2 Bill of Quantity
5.3 Bibliography
CHAPTER ONE
- INTRODUCTION
In today’s domestic residence, electricity play a vital function base on how it is used. The institute of electrical engineering (IEE) wiring regulation (15th Edition) defines an electrical installation as an assembly of associated equipment for the fulfillment of specific purpose and having contain co-ordinated characteristics.
Based presented by engineering principle and intelligent conformity to the safety provision of the National Electrical Code. In the application of conductors, switches, insulators, fuses, circuit breakers, consumers control units, lighting fixtures and other related institution component. The design information is presented so as to clearly instruct the installer in constructing the overall electrical installation to achieve the design intent and implement the engineering concept.
1.1 TYPES OF CONDUIT
There are different types of conduit namely;
- Non-metallic conduit
- Light gauge conduit
- Heavy gauge conduit
- Flexible metallic conduit
- This wall conduit
- Rigid conduit
1.2 USES AND ADVANTAGES / TYPE
1.1.3 NON-METALLIC CONDUIT:-
Many types of non-metallic conduit are available, but schedule polyvinyl chloride (PVC) is the one mostly used. It is a regid heavy walled flame – retardant, heat and sunlight – resistant conduit. It may be used in wet on day location in walls, in ceiling and above or below the ground. It is advisable not to substitute PVC irrigation pipe for schedule low PVC conduit. This type of conduit can be use with metal a non-metallic boxes but the non-metallic boxes are not the same as those use with type NPLC cable.
- LIGHT GAUGE CONDUIT
Light gauge conduit is produced from trip steel which are form into a tube. This type of conduit has an open seam and is only used for small installation at a below 25oc, the light contraction of the tube makes is unsuitable for bending although it can be set.
HEAVY GAUGE CONDUIT
There are two types of heavy gauge conduit. Heavy gauge welded conduit and solid draw conduit.
Heavy gauge welded conduit is formed from strips of heavy gauge sheet steel and is welded at the seam. This is the most common type of conduit and is supplied in size from 16mm to 32mm. Solid brawn conduit is produced by drawing and heated to over a raw forming a heavy gauge seamless tube. This type of conduit is more expensive than welded steel conduit and is only used for flameproof installation.
FLEXIBLE METALLIC CONDUIT
This types of conduit is generally called Greenfield resembles armored cable in appearance but is more adaptable than cable because various sizes and numbers of wire can be pulled into it after it is installed.
This type of conduit be used plastic-covered Greenfield when the internal that have a determinative effect on the wire insulation this metal conduit has a thermoplastic outer sheath covering similar to that used on type T wire, the characteristics and uses of which are detailed in.
THIS WALL CONDUIT
Electrical Metallic Tubing (EMT), commonly called thin-wall conduit, is a metallic tubing that can be use for expose on concealed electrical installations. Ti use should be contended to dry interior locations because it has a very plating that does not protect it form rusting when exposed to the elements or hurried condition.
It is less expensive than regul conduit and much easier to installation, the process of bending require less effort, and the ends do not have to be threaded. In companion to the other wring systems. It ranks behind regid conduit but ahead of the other types of wring when considering the quality and durability of the installation. For this reason and because of the decreased cost in material labour, it is most generally specified for home building construction.
RIGID CONDUIT
Black enamel a galvanized regid conduit is approved for used under most conditions and in most locations. Metal conduit and fittings that are protected foam corrosion enamel may only be use indoors and in areas that are not subject to severe corrosion. Although regid conduit is generally the most expensive type of wining, installation, its inherent strength permits installation without running beards and provides additional damage protection. Its capacity facilitates carrying more conductors in one run that in any other system and its rigidity permits installation with fewer supports than the other types of wiring systems.
CHOICE OF CONDUIT
Today PVC is available alternative to other materials for virtually any application. Its combination of advantage make it a preferred choice when a conduit system is needed. Although there are many types of wiring ystem which can be used to provide a safe efficient, imperative and economical installation but in this project we emphasis on P.V.C. conduit wiring system.
This when PVC was initially introduced to the electrical field, it was considered a substitute material with limited and special applications for example, because of its PVC design and resistance to corrosion, PVC was found useful in damp, corrosive environments such as chemical and fertilizer plants.
As its use by engineers and contractor increased and its system design expanded, PVC’s advantages become evident. Installation of conduit wiring provides mechanical protection and accessible safety to persons and property and provides convenient and accessible electrical raceway system has adequate capacity for future expansion and is readily adaptable to changing conditions.
This write-up provides most up to data and comprehensive information about PVC conduit from basic raw material to installation characteristics of the finished product.
CLICK HERE TO DOWNLOAD THE COMPLETE MATERIAL (CHAPTER 1 -5)
>GUARANTTEE|:| Score 280 Above in 2024 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE:.: GURRANTTEE Score 280 Above in 2022 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE 📱👈WISH TO STUDY & LIVE in UK?:- STUDY, WORK AND LIVE IN the UK Application Form NOW OUT. Call 08030447894