ABSTRACT
This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation.
To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design alternative s for achieving the design solution were sythesized and a choice of an economic method which would satisfy the objective was made.
PASS 2024 UTME WITHOUT STRESS:- 👉 DOWNLOAD and PRACTICE with 2023 UTME CBT APP 📱👈
CLICK to DOWNLOAD NOW.:- 👉 PASS Your POST UTME by Downloading Your School's Post UTME Past Questions and Answers 📱👈
Base on the principles guiding the performance of the motor vehicle, the dimensions and sizes of the various components were established.
Appropriate materials were subsequently selected and fabricated to require sizes. The motor vehicle was then assembled and tested.
After testing, it was found to perform efficiently this satisfying the objective for which it was designed.
TABLE OF CONTENT
Title Page
Release Page
Letter of Transmittal
Approval Page
Dedication
Acknowledgement
CHAPTER ONE
Introduction
Objective of the Project
Literature Review
CHAPTER TWO
The Chassis
The Components of Chassis
CHAPTER THREE
Engine Details
The Petrol Engine
Component Parts of Engines
Engines Terms
Cycle of Operation
The Fuel System
Engine Cooling System
CHAPTER FOUR
Vehicle Body Work
Properties and Uses of Steel in Vehicle Construction
Welding of Steel
Measurement
CHAPTER FIVE
Cost Analysis
CHAPTER SIX
Conclusion
Recommendation
Reference
CHAPTER ONE
INTRODUCTION
Automobile motor vehicle construction contributed a lot towards the economy of life in such a way that transportation is easier and quicker, with this we determined the distance man could travel, even without load.
This motor vehicle is basically designed for domestic, and industrial use. This motor vehicle designed to operate using internal construction engine, which is the most convenient source of power so far developed for driving road vehicles, which drives its power from the burning of fuel and air inside the engine cylinder.
The internal combustion engine (I.C.E) converts the chemical energy in fuel into heat energy and heat energy into mechanical energy. The heat energy is produced by a chemical reaction between the different elements of fuel and air in other ward burning.
This burning of fuel and air takes place inside sealed to expand in all directions. This expansion of gases caused the only movable object (the piston) in the sealed chamber to move down, hence transferring the power produced in the cylinder to the crankshaft of the engine and then creating mechanical energy.
THE OBJECTIVE OF MOTOR VEHICLE CONTRUCTION
They are general objective of motor vehicle construction.
First, understand the historical and technical development of motor vehicle
Second objective is to understand the fundamental cycles of operation of he period and internal combustion engines.
Third objective is to know the constructional processes of motor vehicle.
Fourth objective is to understand the general principles of the transmission system of vehicle bodies.
In order to achieve this we have to know the braking system and their operation principle and understanding the principles of steering mechanisms.
CLICK HERE TO DOWNLOAD THE COMPLETE MATERIAL (CHAPTER 1 -5)
>GUARANTTEE|:| Score 280 Above in 2024 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE:.: GURRANTTEE Score 280 Above in 2022 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE 📱👈WISH TO STUDY & LIVE in UK?:- STUDY, WORK AND LIVE IN the UK Application Form NOW OUT. Call 08030447894
