Download complete project material on Forms of Solar Energy and Their Applications from chapter one to five
ABSTRACT
PASS 2024 UTME WITHOUT STRESS:- 👉 DOWNLOAD and PRACTICE with 2023 UTME CBT APP 📱👈
CLICK to DOWNLOAD NOW.:- 👉 PASS Your POST UTME by Downloading Your School's Post UTME Past Questions and Answers 📱👈
Solar energy is radiant light and heat from the Sun that is harnessed using a range of ever-evolving technologies such as solar heating, photovoltaic, solar thermal energy, solar architecture, molten salt power plants and artificial photosynthesis.
It is an important source of renewable energy and its technologies are broadly characterized as either passive solar or active solar depending on how they capture and distribute solar energy or convert it into solar power.
Active solar techniques include the use of photovoltaic systems, concentrated solar power and solar water heating to harness the energy. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light-dispersing properties, and designing spaces that naturally circulate air.
The total sum of energy consumption in physic laboratory is 1553watts, the exam office is 1.796watts and the H.O.D office is 482watts.  Â
TABLE OF CONTENT
Content
Title Page
Declaration
Approval
Dedication
Acknowledgements
Table of Content
Abstract
CHAPTER ONE
Introduction 1
Earlier uses of solar energy 3
Aims and objectives 8
1.3 justification of the study
1.4Â Â Â Â scope of the study
Limitation of the study 9
CHAPTER TWO
2.0Â Â Â Â Literature Review
2.1Â Â Â Â Energy
2.2Â Â Â Â Secondary Energy
2.3Â Â Â Â Energy Types
2.3.1Â Primary Energy
2.3.2 Renewable Energy Resource
2.3.3Â Hydro Energy
2.3.4Â Wind Energy
2.3.5Â Geothermal Energy
2.3.6Â Oceans Energy
CHAPTER THREE
3.1Â Â Â Â Methodology
3.2Â Â Â Â Material
3.3Â Â Â Â Procedure
3.3.1Â Solar Thermal System Components
3.3.2Â Solar Photovoltaic Cell
3.4Â Â Â Â Applications
CHAPTER FOUR
4.0Â Â Â Â Result
CHAPTER FIVE
5.0Â Â Â Â Discussion, Conclusion and Recommendation
5.2Â Â Â Â Discussion
5.3Â Â Â Â Conclusion
5.4Â Â Â Â Recommendations
Reference
CHAPTER ONE
Introduction
Solar energy is radiant light and heat from the Sun that is harnessed using a range of ever-evolving technologies such as solar heating, photovoltaics, solar thermal energy, solar architecture, molten salt power plants and artificial photosynthesis (Kincard., 2006).
It is an important source of renewable energy and its technologies are broadly characterized as either passive or active solar depending on how they capture and distribute solar energy or convert it into solar power. Active solar techniques include the use of photovoltaic systems, concentrated solar power and solar water heating to harness the energy. Passive solar techniques include orienting a building to the Sun, selecting materials with favorable thermal mass or light-dispersing properties, and designing spaces that naturally circulate air (Kincard., 2006).
In 2011, the International Energy Agency said that “the development of affordable, inexhaustible and clean solar energy technologies will have huge longer-term benefits. It will increase countries’ energy security through reliance on an indigenous, inexhaustible and mostly import-independent resource, enhance sustainability, reduce pollution, lower the costs of mitigating global warming, and keep fossil fuel prices lower than otherwise (Wong,  and Thorntan., 2013).
These advantages are global. Hence the additional costs of the incentives for early deployment should be considered learning investments; they must be wisely spent and need to be widely shared” (Wong and Thorntan, 2013).
The Earth receives 174 petawatts (PW) of incoming solar radiation (insolation) at the upper atmosphere. Approximately 30% is reflected back to space while the rest is absorbed by clouds, oceans and land masses. The spectrum of solar light at the Earth’s surface is mostly spread across the visible and near-infrared ranges with a small part in the near-ultraviolet. Most of the world’s population live in areas with isolation levels of 150-300 watts/m², or 3.5-7.0 kWh/m² per day (Wong and Thorntan, 2013).
Solar radiation is absorbed by the Earth’s land surface, oceans – which cover about 71% of the globe – and atmosphere. Warm air containing evaporated water from the oceans rises, causing atmospheric circulation or convection. When the air reaches a high altitude, where the temperature is low, water vapor condenses into clouds, which rain onto the Earth’s surface, completing the water cycle.
The latent heat of water condensation amplifies convection, producing atmospheric phenomena such as wind, cyclones and anti-cyclones. Sunlight absorbed by the oceans and land masses keeps the surface at an average temperature of 14 °C. By photosynthesis, green plants convert solar energy into chemically stored energy, which produces food, wood and the biomass from which fossil fuels are derived (Wong and Thorntan 2013).
The total solar energy absorbed by Earth’s atmosphere, oceans and land masses is approximately 3,850,000Â exajoules (EJ) per year. In 2002, this was more energy in one hour than the world used in one year. Photosynthesis captures approximately 3,000Â EJ per year in biomass. The amount of solar energy reaching the surface of the planet is so vast that in one year it is about twice as much as will ever be obtained from all of the Earth’s non-renewable resources of coal, oil, natural gas, and mined uranium combined (Holm, 2012).
Earlier Uses Of Solar Energy
1.1.1Â Water Heating
Solar hot water systems use sunlight to heat water. In low geographical latitudes (below 40 degrees) from 60 to 70% of the domestic hot water use with temperatures up to 60 °C can be provided by solar heating systems. The most common types of solar water heaters are evacuated tube collectors (44%) and glazed flat plate collectors (34%) generally used for domestic hot water; and unglazed plastic collectors (21%) used mainly to heat swimming pools (Nancy, 2017).
As of 2007, the total installed capacity of solar hot water systems was approximately 154 thermal gigawatt (GWth). China is the world leader in their deployment with 70Â GWth installed as of 2006 and a long-term goal of 210Â GWth by 2020.
Israel and Cyprus are the per capita leaders in the use of solar hot water systems with over 90% of homes using them. In the United States, Canada, and Australia, heating swimming pools is the dominant application of solar hot water with an installed capacity of 18Â GW as of 2005 (Nancy, Â 2017).
1.1.2Â Cooking
Solar cookers use sunlight for cooking, drying and pasteurization. They can be grouped into three broad categories: box cookers, panel cookers and reflector cookers. The simplest solar cooker is the box cooker first built by Horace de Saussure in 1767. A basic box cooker consists of an insulated container with a transparent lid. It can be used effectively with partially overcast skies and will typically reach temperatures of 90–150 °C (194–302 °F).
Panel cookers use a reflective panel to direct sunlight onto an insulated container and reach temperatures comparable to box cookers. Reflector cookers use various concentrating geometries (dish, trough, Fresnel mirrors) to focus light on a cooking container. These cookers reach temperatures of 315 °C (599 °F) and above but require direct light to function properly and must be repositioned to track the Sun (Runyon, 2011).
1.1.3Â Process Heat
Solar concentrating technologies such as parabolic dish, trough and Scheffler reflectors can provide process heat for commercial and industrial applications. The first commercial system was the Solar Total Energy Project (STEP) in Shenandoah, Georgia, USA where a field of 114 parabolic dishes provided 50% of the process heating, air conditioning and electrical requirements for a clothing factory.
This grid-connected cogeneration system provided 400Â kW of electricity plus thermal energy in the form of 401Â kW steam and 468Â kW chilled water, and had a one-hour peak load thermal storage. Evaporation ponds are shallow pools that concentrate dissolved solids through evaporation.
The use of evaporation ponds to obtain salt from seawater is one of the oldest applications of solar energy. Modern uses include concentrating brine solutions used in leach mining and removing dissolved solids from waste streams. Clothes lines, clotheshorses, and clothes racks dry clothes through evaporation by wind and sunlight without consuming electricity or gas. In some states of the United States legislation protects the “right to dry” clothes.
Unglazed transpired collectors (UTC) are perforated sun-facing walls used for preheating ventilation air. UTCs can raise the incoming air temperature up to 22 °C (40 °F) and deliver outlet temperatures of 45–60 °C (113–140 °F). The short payback period of transpired collectors (3 to 12 years) makes them a more cost-effective alternative than glazed collection systems.
As of 2003, over 80 systems with a combined collector area of 35,000 square metres (380,000 sq ft) had been installed worldwide, including an 860 m2 (9,300 sq ft) collector in Costa Rica used for drying coffee beans and a 1,300 m2 (14,000 sq ft) collector in Coimbatore, India, used for drying marigolds (Wong and Thorntan, 2011).
1.1.4Â Water Treatment
Solar distillation can be used to make saline or brackish water potable. The first recorded instance of this was by 16th-century Arab alchemists. A large-scale solar distillation project was first constructed in 1872 in the Chilean mining town of Las Salinas. The plant, which had solar collection area of 4,700 m2 (51,000 sq ft), could produce up to 22,700 L (5,000 imp gal; 6,000 US gal) per day and operate for 40 years.
Individual still designs include single-slope, double-slope (or greenhouse type), vertical, conical, inverted absorber, multi-wick, and multiple effect.
These stills can operate in passive, active, or hybrid modes. Double-slope stills are the most economical for decentralized domestic purposes, while active multiple effect units are more suitable for large-scale applications (Jacobson, 2009).
Solar energy may be used in a water stabilization pond to treat waste water without chemicals or electricity. A further environmental advantage is that algae grow in such ponds and consume carbon dioxide in photosynthesis, although algae may produce toxic chemicals that make the water unusable (Jacobson, 2009).
Â
Aims and Objectives
To determine the Photovoltaic solar technology, which directly converts sunlight into electricity using panels made of semiconductor cells.
To determine the Solar thermal technology, which captures the sun’s heat. is used directly or converted into mechanical energy.
To Understand the two forms of solar energy.
1.3 Justification of the Study
Like water and air, the Sun is one of the Earth’s life support systems, providing heat and light. Solar energy, which is renewable, widely available and clean, provides enough energy to meet the world’s annual consumption needs every 50 minutes. The challenge is to collect a share – however small – of this heat and radiant energy (Wong, 2011).
1.4 Scope of the Study
This project report covers the two major forms of solar energy, how they work and their application.
Limitation of the Study
This project work was limited to internet research, without direct interview.
SEE >> HOW TO DOWNLOAD THE COMPLETE PROJECT (CHAPTER 1-5) NOW
>GUARANTTEE|:| Score 280 Above in 2024 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE:.: GURRANTTEE Score 280 Above in 2022 UTME👉 DOWNLOAD FREE JAMB CBT APP HERE 📱👈
WISH TO STUDY & LIVE in UK?:- STUDY, WORK AND LIVE IN the UK Application Form NOW OUT. Call 08030447894
